LogiLink Professional PS0016 is an industrial-grade switching power supply for TS35 DIN rail. It converts 100–240 V mains voltage to 24 V / 1.5 A (36 W) DC, and the output voltage can be fine-tuned with the ADJ potentiometer on the front panel. Short-circuit, overcurrent and overvoltage protection, high efficiency and low heat dissipation make it suitable for permanent power supply of automation, network and surveillance equipment in distribution boards and enclosures.
Features
- Wide input range 100–240 V AC, also accepts DC input on the same terminals
- Adjustable output voltage (ADJ)
- Short-circuit, overcurrent and overvoltage protection
- Input/output isolation voltage up to 4000 V AC
- Overvoltage category III (EN 61558-1)
- Low standby power consumption, high efficiency
- Low ripple and noise
- Mounting on DIN rail TS35 × 7.5 / TS35 × 15
- Withstands a 300 V AC input surge for 5 seconds
Technical specifications
- Input voltage: 100–240 V AC (DC input also possible)
- Output: 24 V DC, 1.5 A, 36 W
- Operating temperature: -40…+70 °C
- Indicator: LED (DC ON)
- Connections: screw terminals, wire 24–12 AWG, tightening torque max. 0.4 Nm
- Housing: plastic (UL94 V-0), black
- Dimensions (W × H × D): 35 × 90 × 58 mm
- Packed weight: 140 g
Package contents
- 1 × DIN rail power supply
- 1 × user manual
Please note
- Installation must only be carried out by a qualified electrician; the device is connected to mains voltage.
- The DIN rail must be connected to protective earth.