The SSB BNC female connector (SSB 7386) is a field-attachable cable connector for 10 mm coaxial cables such as Ecoflex 10 and Aircom Premium. It is fitted with a clamping nut, and the centre pin is soldered to the inner conductor.
Features
- Connector type: BNC female, straight, field-attachable (screw-on)
- Cables: Ecoflex 10, Aircom Premium, H 1000, H 2000 Flex, LMR 400 and RG213
- Centre pins: two, hole Ø 2.8 mm (Aircom) and Ø 3.0 mm (Ecoflex 10)
- Standard: IEC 61169-8
- Protection class: IP54
- RoHS: yes
Technical data
- Impedance: 50 Ω
- VSWR: ≤ 1.22 (3 GHz)
- Working voltage: ≤ 500 V rms
- Insulation resistance: ≥ 5 GΩ
- Inner contact resistance: ≤ 1.5 mΩ
- Outer contact resistance: ≤ 1.0 mΩ
- Service life: 500 mating cycles
- Weight: 54.9 g
- Dimensions: length approx. 48.5 mm, Ø 20 mm, wrench sizes 17 and 18 mm
Materials
- Body and metal parts: nickel-plated brass
- Centre pin: gold-plated brass
- Insulator: PTFE
- Seals: rubber
Installation
Slide the nut, clamping ring and rubber washer onto the cable and strip 5 mm of the outer jacket. Fold the braid back, fit the contact sleeve between the foil and the braid, and remove the foil and the dielectric. Solder the centre pin to the inner conductor, fit the Teflon insulator, insert the cable into the body and tighten the nut with 17/18 mm open-end spanners (gap 1–1.5 mm). Mounting instructions are on the Documents tab.