The SSB UHF male connector (SSB 7762-E) is a crimp connector for Ecoflex 5 and H155 coaxial cables. The outer ferrule is crimped and the centre pin is soldered. The UHF connector (PL-259) is common on amateur radio, CB and VHF equipment.
Features
- Connector type: UHF male (PL-259), straight, crimp
- Cables: Ecoflex 5 and H155
- Standard: IEC 60169-12
- Protection class: IP66
- RoHS: yes
Technical data
- Impedance: 50 Ω
- Frequency: up to 1 GHz
- VSWR: < 1.5
- Insertion loss: 0.2 dB
- Working voltage: ≤ 500 V rms
- Insulation resistance: ≥ 5 GΩ
- Inner contact resistance: ≤ 3.0 mΩ
- Outer contact resistance: ≤ 2.0 mΩ
- Operating temperature: −65 °C … +165 °C
- Service life: 500 mating cycles
- Weight: 15.6 g
- Dimensions: length 28.6 mm, Ø 18 mm
Materials
- Body and metal parts: nickel-plated brass
- Centre pin: gold-plated brass
- Insulator: PTFE (Teflon)
Installation
Slide the crimp ferrule onto the cable and strip 27 mm of the outer jacket. Fold the braid back and remove 22 mm of copper foil and 5 mm of dielectric. Insert the cable into the body, solder the tip of the centre pin to the conductor, trim the braid and crimp the ferrule with HEX .255″ (6.47 mm) dies. Mounting instructions are on the Documents tab.