Teltonika RUT906 is an industrial 4G Cat 4 router with dual SIM, four Ethernet ports, Wi-Fi, RS232, RS485, several I/Os and GNSS. It supports industrial protocols such as Modbus, MQTT, BACnet, OPC UA and DNP3.
Connectivity and management
- 4G LTE Cat 4: up to 150 Mbps download and 50 Mbps upload; 3G and 2G fallback.
- Wi-Fi 4 (802.11b/g/n), 2.4 GHz, access point and client mode; up to 100 users.
- 4 × 10/100 Mbps Ethernet (1 WAN and 3 LAN).
- 2 × Mini SIM (2FF) with automatic failover.
- RS232 (DB9, RTS/CTS) and RS485 (2- or 4-wire); USB 2.0 and microSD slot.
- I/O: digital, galvanically isolated and analog (4–20 mA) inputs, open collector and relay outputs.
- GNSS: GPS for location and time synchronisation; NTRIP support.
- Firewall, VPN (OpenVPN, IPsec, WireGuard) and RMS remote management support.
Technical specifications
- 9–30 VDC, 4-pin connector. Passive PoE via LAN1, mode B; not compatible with IEEE 802.3af/at/bt.
- Operating temperature −40 to +75 °C. IP30 protection.
- Dimensions (W × H × D): 109.5 × 50 × 100 mm. Device weight 295 g. Aluminium housing and plastic panels.
- Power consumption: idle < 2 W, max < 7 W.
Package and installation
Order code RUT906000000. EU package contents:
- Teltonika RUT906 router
- 9 W EU power supply
- 2 mobile antennas (magnetic base, SMA male, 3 m cable)
- 2 Wi-Fi antennas (magnetic base, RP-SMA male, 1.5 m cable)
- 1 GNSS antenna (adhesive, SMA male, 3 m cable)
- RS485 connector block
- I/O connector block
- 1.5 m Ethernet cable
- SIM adapters
- Quick start guide
Order code RUT906000100 (mass packing, minimum order 25 pcs): routers only, without accessories.
DIN rail, wall and surface mounting require a separately purchased mounting kit.
User and installation instructions – Teltonika RUT906 Wiki
Teltonika product catalogue 2025 (PDF)