Product description
Roger GNSS IP67 KIT is a complete repeater package in which both the repeater and the power supply are IP67 rated. A single package provides GPS, GLONASS, Galileo and BeiDou indoor coverage over about 1000 square metres and up to 50 metres from the repeater.
Choose the antenna cable length: 20 m (GNSS-L1G1GA-67-KIT1) or 40 m (GNSS-L1G1GA-67-KIT2).
Several repeater packages can be installed in the same building. The coverage of a single package can also be extended with Roger GNSS line amplifiers and splitters.
Package contents
- GNSS-L1G1GA-IP67 repeater
- IP67 power supply
- GNSS outdoor antenna, +38 dB gain
- L mount for the antenna
- Ready-made RF cable, 20 m (KIT1) or 40 m (KIT2)
- User manual
The mains cord for the power supply is connected during installation.
Technical specifications
- Frequencies: GPS L1 (1.57542 GHz), GLONASS G1 (1.602 GHz), Galileo E1 (1.57542 GHz), BeiDou B1 (1.5611 GHz)
- Coverage: about 1000 m², up to 50 m from the repeater
- Overall gain: over 40 dB
- Noise figure: below 2 dB
- Adjustable attenuation: 0–40 dB
- Repeater input connector: TNC female, 50 Ω
- Repeater supply voltage: 12 VDC, current consumption 300 mA
- Antenna power output: +5 VDC, 100 mA
- TX antenna gain: max. +4 dBd, RHCP
- Repeater operating temperature: −25…+55 °C
- Repeater dimensions and weight: 200 × 89 × 39 mm, 290 g
- IP67 power supply: input 100–240 VAC 50/60 Hz, output 12 VDC 1.67 A, max. 20 W, operating temperature −10…+40 °C
- Package weight: approx. 2.6 kg (KIT1) or 3.5 kg (KIT2)
Installation
Mount the outdoor antenna on the roof of the building and connect the supplied cable between the antenna and the repeater. Connect the power supply to the repeater and adjust the repeater gain to prevent signal loopback while reaching the maximum re-radiation level.