The Alfatronix PVPWp-C belongs to the slimline PVPWp models of the PowerVerter PVPro range. It keeps the low-profile design of the range but offers IP65 protection (USB connector excluded). The charger charges Apple and Android phones and other USB devices and is intended for fixed installation, for example in bus and coach seat backs, walls and dashboards.
Features
- 1 × USB-C output, 5.2 VDC, max. 3.0 A.
- The USB-C output offers limited charge assistance for tablets and laptops.
- Wide input voltage range of 9–32 VDC, suitable for 12 V and 24 V vehicles.
- Blue LED indicator.
- Black polycarbonate body with a detachable contrasting trim ring.
- Same dimensions as other PVPro chargers, so models are interchangeable.
- Three-year manufacturer warranty.
Specifications
- Part number: PVPWp-C
- Outputs: 1 × USB-C
- Input voltage: 9–32 VDC (12/24 V)
- Output voltage: 5.2 VDC ±0.2 V
- Output current: max. 3.0 A
- Efficiency: 90%
- Quiescent current: below 2.5 mA
- Output noise: below 50 mV pk-pk
- Isolation: non-isolated
- Operating temperature: −25…+55 °C
- Storage temperature: −25…+100 °C
- Humidity: max. 95%, non-condensing
- Input connection: 6.3 mm flat blade connectors
- Dimensions: Ø37 × 34 mm
- Mounting hole: Ø30 mm, typical rear space 22 mm
- Weight: 24 g
- Ingress protection: IP65 (USB connector excluded)
Installation
- Installed in a 30 mm hole and secured with a rear nut. A front-fit Ff version is available separately.
- For retrofit under seats, on tables or on walls, the USB-POD, USB-TPOD and USB-WPOD mounting pods and the PV-USB-H1 wiring harness are available separately.
- Clean with a damp cloth, do not spray.
Protection
- Over-current, over-temperature, over-voltage, under-voltage and reverse polarity protection.
- The output withstands short circuits and returns to normal operation when the short is removed.
- Transient protection by filters, meets ISO7637-2 for 12/24 V vehicles.
- Internal fuse, external fusing recommended.
Approvals
- CE, UKCA and E marked (Regulation 10).
- Regulation R118 (automotive fire).
- Designed to EN50498, ISO 7637-2, R118 and R080.
In positive-ground systems, the manufacturer recommends installing an Alfatronix isolated converter between the supply and the charger.