N-female Aircell 7 field-attachable connector

Price:

8.70 €


​ Prices excl. VAT – VAT is added at checkout ​ Log in for B2B prices and offers
Outdoor 5G Router Enclosure, 4×4 MIMO Omnidirectional, Wi‑Fi, 7 dBi
Outdoor 5G Router Enclosure, 4×4 MIMO Omnidirectional, Wi‑Fi, 7 dBi
245.20 €
245.20 €
5G panel antenna for outdoor use 4×4 MIMO 11 dBi 617-6000 MHz
5G panel antenna for outdoor use 4×4 MIMO 11 dBi 617-6000 MHz
358.00 €
358.00 €

N-female Aircell 7 field-attachable connector

https://www.tele-tukku.fi/web/image/product.template/72248/image_1920?unique=3f98b60

SSB

Field-attachable N female cable connector for Aircell 7 and Ecoflex 7 coaxial cables, 50 Ω, frequency up to 8 GHz. Fitted with a clamping nut using 16 mm spanners; the centre pin is soldered.

8.70 € 8.700000000000001 EUR 8.70 €

Not Available For Sale


  • Brand
  • Cable Type

This combination does not exist.

Check availability


SKU :
302107
Category :
N Connectors
Share :

The SSB N female connector (SSB 7393) is a field-attachable cable connector for Aircell 7 and Ecoflex 7 coaxial cables and other 7 mm cables. It is fitted with a clamping nut, and the centre pin is soldered to the inner conductor.

Features

  • Connector type: N female, straight, field-attachable (screw-on)
  • Cables: Aircell 7, Ecoflex 7, H 2007 and LMR 300
  • Centre pins: hole Ø 2.0 mm
  • Standard: IEC 61169-16
  • RoHS: yes

Technical data

  • Impedance: 50 Ω
  • Frequency: up to 8 GHz
  • VSWR: ≤ 1.3
  • Insertion loss: ≤ 0.1 dB / GHz
  • Working voltage: 1000 V (DC / 50 Hz)
  • Insulation resistance: ≥ 5 GΩ
  • Inner contact resistance: ≤ 2.5 mΩ
  • Outer contact resistance: ≤ 1.0 mΩ
  • Operating temperature: −55 °C … +155 °C
  • Service life: 500 mating cycles
  • Weight: 49.4 g
  • Dimensions: length 39 mm, Ø 17.3 mm, wrench sizes 16 mm

Materials

  • Body and metal parts: nickel-plated brass
  • Centre pin: gold-plated brass
  • Insulator: PTFE

Installation

Slide the nut, clamping ring and rubber washer onto the cable and strip 8 mm of the outer jacket. Fold the braid back, fit the contact sleeve between the foil and the braid, and remove the foil and the dielectric. Solder the centre pin to the inner conductor through the small hole, insert the cable into the body and tighten the nut with two 16 mm open-end spanners (gap 0.5–1.0 mm). Mounting instructions are on the Documents tab.

General
Brand SSB
Tekniset tiedot
Cable Type Aircell 7
Asennusohje (EN)
Download
Datalehti
Download