The SSB N female connector (SSB 7352) is a field-attachable cable connector for Ecoflex 15 Plus Heatex and LMR 600 coaxial cables. It is fitted with a clamping nut without soldering or a crimping tool, and IP67 sealing protects the joint from moisture.
Features
- Connector type: N female, straight, field-attachable (screw-on)
- Cables: Ecoflex 15 Plus Heatex and LMR 600
- Centre pins: hole Ø 4.6 mm
- Standard: IEC 61169-16
- Protection class: IP67
- RoHS: yes
Technical data
- Impedance: 50 Ω
- Frequency: up to 11 GHz
- Working voltage: ≤ 1000 V rms
- Insulation resistance: ≥ 5 GΩ
- Inner contact resistance: ≤ 1.5 mΩ
- Outer contact resistance: ≤ 1.0 mΩ
- Operating temperature: −45 °C … +155 °C
- Weight: 74 g
- Dimensions: length approx. 58.6 mm, Ø 22.5 mm, wrench sizes 19 mm
Materials
- Body and metal parts: CuSnZn3
- Centre pin: CuSn6, diamagnetic
- Insulator: PTFE
- Seals: rubber, mating-face gasket silicone
Installation
Cut the cable square with a metal saw and strip 8 mm of the outer jacket. Fold the braid back and fit the contact sleeve between the foil and the braid. Remove the foil and the dielectric, fit the centre pin and tighten the clamping nut with 19 mm spanners. Illustrated stripping instructions are on the Documents tab.